NavCom SF-2110 Rev.C - Manual (Page 33)

SF-2110 User Guide – Rev. C
9
If the unit is turned off from the Ignition pin, the
front panel On/Off switch is over-ridden and will
not function.
9
If the unit is turned on from the Ignition pin and
the user wishes to use the On/Off switch for future
on/off procedures, the unit must be turned off from
the front panel On/Off switch.
Communication Ports
The SF-2110 provides two 9-pin female Positronic
connector communication ports labeled Port A and
Port B located at the back of the sensor, as shown in
Figure 9. Each conforms to the EIA RS232 standard
with data rates from 4.8 to 115.2Kbps. The connector
pin-outs are described in Table 4A and 5B. The
supplied interface data cable (P/N 94-310260-
3006LF) is constructed as described in Figure 8. The
SF-2110 is configured as a DCE device. Laptop and
desktop computers are configured as DTE devices,
therefore a straight-through cable provides proper
connectivity (PC TXD pin 2 connects to SF-2110 RXD
pin 2).
New models of the SF-2110 provide Bluetooth
wireless connectivity within a range of 10 meters (32
feet). Only SF-2110 sensors with the Bluetooth icon
on the front indicator panel are Bluetooth capable
(see Figure 11). The Bluetooth module contains
Bluetooth-certified components. The data rate for
Bluetooth communications is 230.4Kbps.
* Consult Release Notes on the NavCom web site for availability.
2-31