NavCom SF-2110 Rev.C - Manual (Page 29)

SF-2110 User Guide – Rev. C
Chapter 2 ................................. Interfacing
This chapter details the SF-2110 GPS sensor
connectors, LED display, appropriate sources of
electrical power, and how to interface the
communication ports.
Electrical Power
A rear panel 9-pin Positronic male connector provides
electrical power to the SF-2110. Pin assignments are
given in Table 2; see Figure 4 for pin location on the
connector.
Table 2: External Power Cable Pin-Out
Pin Signal Color
1 *1PPS Out Blue
2 Ignition Brown
3 *Event Yellow
4 Power Input Orange
5 Power Return Black
6 Power Input Red
7 Not Used Green
8 Not Used Violet
9 Signal GND Gray
* Consult Release Notes on the NavCom web site for availability.
2-27