RGBLink VSP 516S User Manual - Manual (Page 101)

6. System Setup and Operation
How to Realize the Freeze and Live Image Switching
VSP 516S User Manual 101
How to Realize the Freeze and the Live Image Switching
1. Push the [FREEZE] button, and freeze the current image.
2. Push the [FREEZE] button again, the current freeze image is switched
to live image:
Note
Use can set FREEZE IMAGE or LIVE IMAGE by
MENU OUTPUT DISPLAY MODE
MODE
Note
In PIP mode, IMAGE A and IMAGE B are freeze
or live at the same time.
FREEZE IMAGE
LIVE IMAGE