RGBLink VSP 516S User Manual - Manual (Page 48)

4. Menu Orientation
MENU
VSP 516S User Manual 48
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
NOTE
For details, please refer to the instructions in the manual: How to Set up the
Size and Position of the Single Image.
SCREEN：Screen setting, user can change the screen through the digital
setting parameters to easily change the screen size and position. Mainly
used in the LED display. Settings as follow:
show menus as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
Mode: Can choose SCREEN SIZE or FULL SIZE.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
For details, please refer to the instructions in the manual: How to Realize
the Screen Size and Full Size Switching.
RATIO：Aspect ratio setting, user can choose 4:3, 16:9 and DEFAULT.
PICTURE: Picture setting, the sub-menu as following:
BRIGHTNESS: It can change the image brightness via BRIGHTNESS
setting.
CONTRAST: It can change the image contrast via CONTRAST setting.
The SCALE/CROP button can also fulfill this
setting.