RGBLink VSP 516S User Manual - Manual (Page 56)

4. Menu Orientation
MENU
VSP 516S User Manual 56
TIMING CONTROL: Timing control switch.
CHANGE DATE.
CHANGE TIME.
ETHERNET: Network setting, including:
NETWORK ON/OFF: Can choose
―ON‖ or ―OFF‖.
IP ADDRESS: 192.168.000.100.
SUBNET MASK: 255.255.255.000.
GATEWAY: 192.168.000.001.
LOCK FRONT PANEL: Through this setting can choose whether to lock
the keys, if the key is locked, the equipment will remind: "Buttons are
locked! Press MENU key and hold 3s to release!"
LICENSE SETUP: The device will not work if excess the prescribed time,
there are no signal output, it needs to input password and modify the using
time to continue to work.
CAN USE TIME: Display the rest of the working time.
HOT BACKUP: User can enable or disable the hot backup function.
Choose ―ON‖ to set the backup signal for BACKUP_1 to BACKUP_5. It will
switch to the backup signal if interrupt signal.
USB UPDATE: User can update the device by USB.
LANGUAGE
Through this option, user can choose Chinese or English according to their
needs to operate the interface more quickly.
FACTORY RESET
Enter FACTORY RESET to reset the IP, choose YES and push the knob to
confirm, then VSP 516S is reset to its factory settings. After 5 seconds, it
completes factory settings and is ready for more operations.