Communication software guideline – RGBLink VSP 516S User Manual User Manual
Page 78
Advertising
5. Communication Software Guideline
How to Connect Windows Control Program by LAN Interface
VSP 516S User Manual 78
How to Connect Windows Control Program by LAN
First, install the upper computer software in the computer;
Connect VSP 516S and computer with cable, the connection diagram is
as follows:
Version 1: VSP 516S with audio:
Version 2: VSP 516S with two sending cards:
Power on VSP 516S, start the network function, specific steps are as
follows: MENU--SYSTEM -- ETHERNET -- NERWORK, select ON, and
check the IP address of the equipment, confirm if it is consistent with the
computer, such as 192.168.0.***, take 192.168.0.100 for example.
Open the upper computer software, click
, interface is shown as
follows:
Advertising