RGBLink VSP 516S User Manual - Manual (Page 128)

VSP 516S User Manual 128
How to Install the SDI Optional Module
The VSP 516S can be modified to install or remove optional module that
change the input and/or output formats that the processor can process. We
will introduce ―How to Install the SDI Optional Module‖ in the following parts,
specific steps are as follows:
1. Take Apart the VSP 516S
2. Install the SDI Optional Module
3. Assemble the VSP 516S
Part 1: Take Apart the VSP 516S
Specific steps are as follows:
1. Disconnect the AC power cord from the VSP 516S to remove power from
the unit.
Warning: To prevent electric shock, always unplug the VSP 516S from the
AC power source before opening the enclosure.
2. Disconnect all signal and control cables.
3. Remove the 7 screws on the top cover (Figure 1).
(Figure 1)
4. Remove all the screws on the back panel (Figure 2).