RGBLink VSP 516S User Manual - Manual (Page 110)

6. System Setup and Operation
How to Save the Parameter
VSP 516S User Manual 110
How to Save the Parameter
Save user mode to the customer for different scene directly call, leave out
the edit operation inconvenience, VSP 516S provides ten save
preferences.
1. Push the [SAVE/PIP1] button, the button light is on, and enable the
SAVE function.
2. Turn the knob, and choose the position that will save, push the knob
to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means SAVE1~10, user can push
any button on to save. For example, save to SAVE 2, push button 2, the
OLED panel will show as follows after saving.
User can also push the [MENU/EFFECT] button to enter to the menu
items, turn the knob to choose <SAVE SETUP>, and choose ―SAVE TO‖
to save the parameter.
4. Again push the [SAVE/PIP1] button, the button light is off, and disable
the SAVE function.
SAVE TO
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite