RGBLink VSP 516S User Manual - Manual (Page 113)

6. System Setup and Operation
How to Achieve Multiple Cascade
VSP 516S User Manual 113
as 1248*1024.
(2) Push the [SCALE/CROP] button of the first VSP 516S, and choose
[SPLIT], turn the knob and choose <SPLIT>, push the knob to confirm,
then turn the knob and choose [ON] to enable the SPLIT function.
Set the following items by knob or number button, (The operations are
same with [SCALE]).
Set [H TOTAL] as 2400 (The total width points of the two screens).
Set [V TOTAL] as 1024 (Horizontal split, so the height is unchanged).
Set [H SIZE] as 1152 ( The screen width of VSP 516S).
Set [V SIZE] as 1024 (The screen height of VSP 516S).
Set [H POS] as 0 (The horizontal position of VSP 516S).
Set [V POS] as 0 (The vertical position of VSP 516S).
(3) The same method, enable the [SPLIT] function for the second
VSP 516S.
Set the following values by knob or number button (The operations are
same with [SCALE]).
Set [H TOTAL] as 2400 (The total width points of the two screens).
Set [V TOTAL] as 1024 (Horizontal split, so the height is unchanged).
Set [H SIZE] as 1248 ( The screen width of VSP 516S).
Set [V SIZE] as 1024 (The screen height of VSP 516S).
Set [H POS] for 1152 (The horizontal position of VSP 516S, that is the
screen width of the first VSP 516S).
Set the vertical position [V POS] for (The vertical position of
VSP 516S, that is horizontal split, so the vertical value is unchanged).
3. Save
Push the [SAVE/PIP1] button, the key lights, start the SAVE function.
Select the location that need to save, push the corresponding
button, such as save to SAVE1, push [CV1/1] button can complete