Seaward Europa Pac Plus - Manual (Page 16)

Introduction
10
Chapter 2 Using the Tester
Introduction
Controls
A rotary switch defines the basic test (or action) to be performed, the
tests are arranged on the switch such that a clockwise rotation is
needed to perform a normal sequence of tests.
Cursor buttons ( ↑ and ↓ ) allow for adjustment of test variables,
e.g. test duration. The SELECT button is used to change the variable
to be adjusted.
The large START/STOP button is used to start a Test.
Display
Test Icons
Primary
Display
Secondary
Display
The display consists of a number of Icons to provide visual indication
of the tester status, a primary 4 digit, 7 segment display, along with a
4 digit secondary display, and a 2 digit duration time display,
Test Icons
Indicates the test selected,