SVSi N2000 Series - Manual (Page 39)

Page 39 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options Encoder Setup Section
Table 3-1. Settings Page: Encoder Setup Section
Option Description Notes
Device Name Enter a user-friendly name for the unit. More descriptive names in this field
help you organize and manage the
SVSi system efficiently. Names based
on the unit’s location and function are
very useful. Some good examples are
Lobby-Left-VGA (for left side of lobby,
VGA input) or CR201-HDMI (for
Conference Room 201, HDMI input).
Keep in mind the matrices are
organized alphanumerically.
TX Enable Enable to broadcast the AV signals.
Disable to turn off/stop broadcasting. Unit name appears in GREY text (in the
Matrix) when this setting is disabled.
Stream View/edit the current transmit stream
number. To better understand this setting, think
of Encoders more like a channel on a
cable box, rather than a traditional AV
Matrix. Each Encoder must have a
unique stream number, just like every
channel must have a unique channel
number (e.g., Food Network and HGTV
cannot both be on channel 201).
Audio Input Type Select Unbalanced (single-ended) or
Balanced analog audio input.
Scaler Enable to scale outgoing content to a
fixed resolution or to use the Crop/
Pan/Zoom functions.
Output Mode Select the output resolution of the
video to be transmitted onto the
network (the Scaler check box must be
enabled for this to be applicable).
Live/Local Select live video or locally stored
images for transmission onto the
network. When video is not available, it
automatically goes into local mode. When video is not available, the most
recently played local playlist is
displayed.
Audio Sample Rate Select the sample rate, in Hz, for the
analog audio.