SVSi N2000 Series - Manual (Page 74)

Page 74 N2000 Series User Manual www.svsiav.com
Chapter 4. Decoder Options Advanced Settings
Table 4-2. Settings Page: Advanced Settings
Option Description Notes
Settings Lock Enable to lock the Decoder IP settings
and stream number, preventing
automated processes (from N-Able or
N-Command) from occurring. This does not prevent a control system
from making changes or a user from
manually making changes.
Input audio for
LocalPlay Select to enable the input audio when
the Live/Local menu is set to one of
the local images.
YCbCr 4:2:2 Output Set YCbCr output to be disabled,
enabled, or selected automatically
based on the connected display.
Simplified DVI
Detect Select to enable the detection of a
display device using a simple line level
check.
Last Frame Hold Select to cause the Encoder to
continue playing the last valid video
frame if the network connection is lost. When enabled, Local Play will not
appear.
Gen 1 Compatibility Set compatibility with the color space
of legacy equipment to be disabled,
enabled, or selected automatically
based on the identifying information in
the video stream.
DVI off on stream
loss Select to disable the video output drive
when the video stream is not available.
DVI Enable Select to enable output video.
Invert DVI Horizontal
Sync Select to invert the polarity of the
horizontal sync signal driven to the
display device.
Invert DVI Vertical
Sync Select to invert the polarity of the
vertical sync signal driven to the
display device.
Gratuitous ARP Enable the Decoder to send a periodic
Address Resolution Protocol (ARP)
packet to the network.
ARP Interval (secs) Determine how often (in seconds) the
unit transmits gratuitous ARP packets.
Unsolicited Status Enable the Decoder to send a periodic
status packet to the Send Status
Address described below.