SVSi N2000 Series User Manual

Page 50

Advertising
background image

Page 50

N2000 Series User Manual

www.svsiav.com

Chapter 3. Encoder Options

Status Section

Port 50002 Source
IP

Shows the IP address of the currently
connected device or displays
Disconnected if no connection exists.

Port 50002 can only accept a single

external connection at a time. If a
device is currently showing the port
occupied (by a control system or other
device), then other connections will be
rejected. However, connection
attempts from the same IP will
override the current connection.

Serial Source IP

Shows the IP address of the currently
connected device or displays
Disconnected if no connection exists.

Only a single external connection can
be accepted on the port. If a device is
currently showing the port occupied
(by a control system or other device),
then other connections will be
rejected. However, connection
attempts from the same IP will
override the current connection.

Flush buttons

These buttons reset the port.

Table 3-5. Settings Page: Status Section (Continued)

Option

Description

Notes

Advertising