SVSi N2000 Series - Manual (Page 53)

Page 53 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options EDID Section
EDID Section
The EDID (Extended Display ID Data) section of the Settings page is shown in Figure 3-10 . Options are
described in Table 3-7 .
Edit the Encoder’s EDID if you need to change the device type it appears as to the source. There are two
different ways to control the EDID of the Encoders.
Option 1: Use the default settings drop-down menu and select from the options available. Then click Reset
EDID. This will work for most sources and is most often set to Stereo (2 channel).
Option 2: When using an EDID captured from a source connected to an Encoder, paste the data in to the
white EDID block, overwriting existing EDID. Then click Set EDID.
Figure 3-10. EDID Section
The source will need to be disconnected while modifying EDID settings.
Table 3-7. Settings Page: EDID Section
Option Description
Show EDID Click this link to view the Encoder’s current EDID table.
Read local EDID Click if source EDID has changed (refreshes the EDID table).
Set EDID If pasting a custom EDID, click to apply the changes.