SVSi N2000 Series - Manual (Page 61)

Page 61 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options N-Act Page
N-ACT PAGE
Click the N-Act link at the top of any of the main web pages to access the page shown in Figure 3-15 . This
page allows you to create command lists which are performed automatically by the unit based on power or
video connection (without the use of an outside controller). For example, you can tell a projector and lights to
come on when the Encoder powers up. You can add multiple commands for each event. See
Table 3-12 for
option descriptions.
Figure 3-15. N-Act Page
Table 3-12. N-Act Page Options
Option Description
Enable Events Enable to activate the configured events.
Power on Event Create/delete/test events to be performed when the Encoder powers on. Visit our
website for more details on Application Programming Interface (API) commands.
DVI Connected
Event Create/delete/test events to be performed when the Encoder is connected to a
video source. The Trigger Delay field specifies how long the device has to be
connected for the command to be executed.