Teac DR-1 - Manual (Page 10)

10
TASCAM DR-1
Front Panel
Rear Panel
Bottom panel
3–Part names and functions
h MIC 2 IN jack
Use this standard mono jack to connect a
microphone with a 1/4˝ plug.
NOTE
We call this the Front Panel because this is the end that
faces the operator of the unit when placed on a table with
the built-in mic facing the sound source.
j MIC 1 IN jack
Use this input jack to connect a stereo mini-jack
microphone. This jack provides plug-in power
when set to do so on the Input Setting Screen.
k LINE IN jack
Use this stereo mini-jack for line input. The input
level is fixed at –10 dBV.
NOTE
We call this the Rear Panel because this is the end that
faces away from the operator of the unit when placed
on a table with the built-in mic (this end) facing the
sound source.
l Reset hole
If the unit is operating abnormally, push the end of
a paperclip or similar item into this hole to press
the system reset button inside the unit. This turns
the power OFF and resets the DR-1’s system.
CAUTION
Do not press the reset button if the unit is functioning
properly.
; Battery case
This holds the specialized lithium ion battery.