Teac DR-1 - Manual (Page 35)

TASCAM DR-1
35
16–System Settings and Formatting
From the Setup Screen, you can change various
settings to optimize the device for your use
environment and other requirements. You can also
initialize and format the SD card.
To open the Setup Screen, press the
MENU key. Select
SETUP
from the Menu Screen and press the ¥/π key.
The following settings can be made for the items on
the Setup Screen.
Making System Settings
Restoring the factory settings
Setting the search speed
Use the
CUE/REV SPEED
item to set the speed of
forward and backward searching when pressing and
holding the
≤ and µ keys.
Options:
x2
,
x4
,
x8
(factory setting),
x10
Turning the unit power OFF automatically
Use the
AUTO OFF
item to set the time before the
unit power automatically turns OFF after the last
activity or use when powered by the internal battery.
Options:
OFF
(factory setting—the unit does not
automatically turn OFF),
3 min
,
5 min
,
10 min
,
30 min
Backlight Auto OFF setting
Use
BACKLIGHT
to set the time until the backlight
automatically turns OFF after the last operation when
powered by the internal battery.
Options:
OFF
(backlight always on),
5 sec
(factory
setting),
10 sec
,
15 sec
,
30 sec
Adjust the display contrast
Use
CONTRAST
to adjust the display contrast.
Options: 1–20 (factory setting: 12)
Adjust the backlight brightness
Use
DIMMER
to adjust the backlight brightness.
Options:
HIGH
(factory setting),
LOW
,
OFF
(no backlight)
Use the
INITIALIZE
item to restore the various
settings of this unit to their factory settings.
1 Select
INITIALIZE
and press the ¥/π key to
highlight “
Exec
.”
2 Press the ¥/π key again to open a confirmation
pop-up window.
3 Press the ¥/π key to initialize the unit. Press the
STOP/HOME key to cancel initialization.