Teac DR-1 - Manual (Page 33)

TASCAM DR-1
33
14–Using the Metronome
The DR-1 has a built-in metronome that outputs its
sound from the /LINE OUT jack.
Setting the metronome
Starting and stopping the metronome
To use the metronome, press the MENU key to open
the Menu Screen. Select the
METRONOME
item and
press the ¥/π key.
You can set the items shown on the right on the
Metronome Screen.
TEMPO
Set the speed to a value between 20 and 250 beats per
minute (BPM).
BEAT
Set the accent frequency between 0 and 9. There is no
accent when set to 0. For example, set this to 4 if you
want 4/4 time.
LEVEL
Set the metronome volume.
When the Metronome screen is open, press the ¥/π
key to start and stop the metronome.
NOTE
When using the metronome, you cannot return to the
Home Screen .