Teac DR-1 - Manual (Page 11)

TASCAM DR-1
11
4–Screen Overview
1 Power indicator
The battery icon appears when the lithium ion
battery is in use. The number of bars shows the
current level of remaining battery power. The
battery icon flashes when charging is necessary.
2 Unit status
This icon show the current operation status.
¥ Track playing
π File stopped in progress (paused)
· File stopped at its beginning
˚ Fast forwarding
∆ Fast rewinding
≤ Skipping to the beginning of the next track
µ Skipping to the beginning of the current or
previous track
3 Elapsed time
Shows the elapsed time (hours: minutes: seconds)
of the currently playing track.
4 Playback position display bar
This bar shows the current playback position. The
bar darkens from the left as playback proceeds.
5 Remaining time
Shows the remaining playback time of the current
track (hours: minutes: seconds).
6 Status of loop IN and OUT points
This shows the status of the IN and OUT point
settings for loop playback.
If an IN point is set, the icon appears above
the display bar at the position equivalent to the
playback location.
If an OUT point is set, the icon appears above
the display bar at the position equivalent to the
playback location.
7 Loop/repeat setting status
The following icons appear depending on the
current loop/repeat setting.
Single playback
Repeat playback of 1 track
Repeat playback of all tracks in the
play area
Loop repeat active
8 File information
The tag information or file name of the currently
playing track is shown. If an MP3 file has ID3
tag information, the ID3 tag information is given
priority. The file name is shown for WAV files and
for MP3 files that do not have ID3 tag information.
NOTE
ID3 tag information includes the title, artist name and
other information that can be saved in an MP3 file.
9 S elected playback area
Shows the currently selected playback area.
ALL
All files in the Music Folder
FOLDER
All files in the selected sub-folder
of the Music Folder
P.LIST
Files added to the playlist
0 Playback file number/total number of files
The total number of files in the selected playback
area and the number of the current file.
q INPUT level meter
This shows the combined level of the selected
input signal and the currently playing file.
When
MONITOR
is set to
OFF
, the input signal is
not mixed in.
If the input level exceeds the maximum allowable
level, a dot is lit at the right end of the level meter.
When the unit is ordinarily playing or stopped, the
Home Screen appears on the display. Setting screens
appear when making various settings, and the Record
Screen appears when the unit is recording or in
recording standby.
The items that appear on the Home Screen are
explained below. See the explanations later in this
chapter for the setting screens and the Record Screen.
Home Screen