Teac MD-CD1MKIII - Manual (Page 23)

TASCAM MD-CD1MKIII
23
6 – Menu Operation
The various settings and editing operations possible with the MD-CD1MKIII are performed through menu options shown
on the display. Among the many menu setting options, some may be made directly using the buttons on the remote
control.
Menu configuration
There are menus for both CD and MD operation. Below each menu are sub-menus, and in each submenu there are menu
options. The menus are configured as shown below.
CD Menu
Menu option Function Manual reference Page
CD PLAY sub-menu (options for CD playback)
PLAY MODE Playback mode settings “Playback modes” 26
REPEAT Repeat mode settings “Repeat playback” 29
A_CUE LEVEL Auto Cue level setting “Auto cue” 28
A_CUE Auto Cue on/off “Auto cue” 28
A_READY Auto Ready on/off “Auto ready (of a specified track)” 28
PITCH STEP Pitch control variable pitch setting “Pitch control” 30
EOM TRK Track EOM mode and operation time “End of disc/track warning” 32
EOM DISC Disc EOM mode and operation time “End of disc/track warning” 32
TIMER PLAY Timer play on/off “Timer playback” 29
KEY LEVEL Key control level setting “Changing the key of playback” 32
DIR MODE Data CD directory playback mode on/off “MP3 and WAV file directory
playback”
33
MP3 ACTION Setting the error handling during MP3 file playback “Setting MP3 ACTION” 33
CD VOL FUNC sub-menu (CD volume function options)
PLAY VOLUME Output level setting “Output volume” 33
FADE IN Fade-in operation time setting “Fade-in and fade-out” 32
FADE OUT Fade-out operation time setting “Fade-in and fade-out” 32
FADE MODE Setting operation mode after fade-out end “Fade-in and fade-out” 32
SERIAL sub-menu (RS-232C data communication options)
BAUD RATE data transmission speed setting “Data settings/service data” 49
LENGTH data word length setting “Data settings/service data” 49
PARITY data parity bit setting “Data settings/service data” 49
STOP BIT data stop bit setting “Data settings/service data” 49
SYSTEM sub-menu (options for the unit)
KEYBOARD setting for keyboard type “Keyboard type setting” 46
COMMON CD/MD priority for COMMON output “Basic playback operation” 26
CD P_TIME Confirming total CD playing time “Data settings/service data” 49
MD P_TIME Confirming total MD playing time “Data settings/service data” 49
MD R_TIME Confirming total MD recording time “Data settings/service data” 49
IR REMOTE Disabling/Enabling remote control (RC-MC1) operation “Operation basics” 25
PANEL LOCK Disabling/Enabling panel operation "Locking the panel operations" 48
F_PRESET Resetting all data to initial default settings “Viewing service data” 49
CLEAR PROG Deleting a program Erase a CD or MD program 31