Teac MD-CD1MKIII - Manual (Page 45)

TASCAM MD-CD1MKIII
45
NOTE
If there is no track title, only the cursor will flash and
nothing will be displayed.
3 Following the title input guidelines above, input
the title, and press the MD MENU button on the
front panel or the MENU button on the remote
control to confirm.
Method 2
ª
With this method, the Title Input mode is selected first.
1 During stop mode, select the
TITLE INPUT?
option on the TITLE sub-menu on the MD menu.
Title> Disc
is displayed.
2 Select the track for title input using the MULTI JOG
dial on the front panel, or the MENU –/+ button on
the remote control, then press the MULTI JOG dial
(or the YES button) on the front panel, or the ENT/
YES button on the remote control.
For example, select
Title> 003
to choose track 3.
When a selection is made, the current track title is
shown on the character display, Title Edit mode is
entered, and the cursor flashes.
NOTE
If there is no track title, only the cursor will flash and
nothing will be displayed.
3 Add a title following the procedure of “Title input
operation” on the previous page, then press the
MD MENU key on the unit (or the MENU key on the
remote control) to confirm the title.
Group title input
1 During stop mode, select the
TITLE GRP?
option
on the TITLE sub-menu on the MD menu.
Title Grp> **
is displayed, with
**
representing
the group number.
2 Press the MULTI JOG dial on the front panel or the
ENT/YES button on the remote control.
The current group title is shown on the character
display, Title Edit mode is entered, and the cursor
flashes. The group number flashes on the track
number display.
3 Following the guidelines for title input methods
above, input the title, and press the MD MENU
button on the front panel or the MENU button on
the remote control to confirm.
11 – Title input