Teac MD-CD1MKIII - Manual (Page 9)

TASCAM MD-CD1MKIII
9
Included items
The included items are listed below.
Take care when opening the package not to damage the
items. Keep the package materials for transportation in
the future.
Please contact the store where you purchased this unit
if any of these items are missing or have been damaged
during transportation.
Main unit • ........................................................................................ 1
Power cord • .................................................................................... 1
Wireless remote control (TASCAM RC-MC1) • ...................... 1
AA batteries for the remote control unit • ............................ 2
A rack-mounting screw kit • ....................................................... 1
A warranty card • ........................................................................... 1
Owner’s manual (this manual) • ............................................... 1
NOTE
The batteries are not supplied for Taiwan.
About this manual
In this manual, we use the following conventions:
“MiniDisc” is abbreviated as “MD.” •
The names of buttons and controls are given in the •
following typeface: STOP.
Messages on the unit’s display are shown like this:
•
REPEAT
When the character display area shows information •
about discs and tracks this is called the “information
display” mode.
CDs on which MP3 or WAV audio files are recorded may
•
be mentioned as “data CDs”.
Additional information is introduced in the styles
•
below when needed:
TIP
Useful hints when using the unit.
NOTE
Explanation of actions in special situation and
supplement.
CAUTION
Instructions that should be followed to avoid injury,
damage to the unit or other equipment, and loss of data.
Trademarks
TASCAM is a trademark of TEAC Corporation, registered •
in the U.S. and other countries.
US and foreign patents licensed from Dolby
•
Laboratories Licensing Corporation.
MPEG Layer-3 audio coding technology licensed from
•
Fraunhofer IIS and Thomson.
Other company names, product names and logos
•
in this document are the trademarks or registered
trademarks of their respective owners.
Any data, including, but not limited to information,
described herein are intended only as illustrations
of such data and/or information and not as the
specifications for such data and/or information. TEAC
Corporation disclaims any warranty that any use
of such data and/or information shall be free from
infringement of any third party’s intellectual property
rights or other proprietary rights, and further, assumes
no liability of whatsoever nature in the event of any
such infringement, or arising from or connected with
or related to the use of such data and/or information.
This product is designed to help you record and
reproduce sound works to which you own the
copyright, or where you have obtained permission
from the copyright holder or the rightful licensor.
Unless you own the copyright, or have obtained the
appropriate permission from the copyright holder
or the rightful licensor, your unauthorized recording,
reproduction or distribution thereof may result in
severe criminal penalties under copyright laws and
international copyright treaties. If you are uncertain
about your rights, contact your legal advisor. Under no
circumstances will TEAC Corporation be responsible
for the consequences of any illegal copying performed
using the recorder.
Precautions for placement and
use
The operating temperature should be between 5°C and •
40°C (41°F and 104°F).
Do not install in the following types of places. Doing
•
so could degrade the sound quality and/or cause
malfunctions.
Places with significant vibrations or that are •
otherwise unstable
Near windows or other places exposed to direct
•
sunlight
Near heaters or other extremely hot places
•
Extremely cold places •
1 – Introduction