Teo 8810 ISDN Phone - Manual (Page 14)

10 Tone Commander 8810 User Guide
Transferring Calls
Use this feature to transfer an active call to another party.
Press the TRAN key while on an active call.
The current call is placed on hold, and an idle call appearance
is automatically selected. The
TRAN indicator flashes (on
some network switch types, the CONF indicator may light
instead of the TRAN indicator).
Dial the party you want to transfer the call to with the dial pad
or a Speed Dial key. Wait until the called party answers to
announce the call, or transfer it immediately before the called
party answers.
Press the TRAN key again to complete the transfer.
DSS Transfer
While on an active call, press the TRAN key.
Press the DSS key for the destination party.
Press the TRAN key to complete the transfer.
Note: Complete an in-progress call transfer before answering
another call.
Conferencing Calls
You can initiate multi-party conference calls. Conferences are limited to
3 or 6 parties, depending on your network configuration.
Conferencing a New Call
Press the CONF key while on an active call.
The current call is placed on hold and an idle call appearance
is automatically selected. The
CONF indicator lights.
Dial the party you wish to add to the conference.