Teo 8810 ISDN Phone - Manual (Page 32)

28 Tone Commander 8810 User Guide
08=CA/DN# 5559876
DSS LABEL
08=DSS/DN# 5559876
CA/DN DSS# LABEL
1001
<BKSP CLEAR PAUSE
DSS Keys
DSS keys are a special type of Call Appearance/Directory Number
keys that are programmed with speed dial numbers to provide Direct
Station Selection. When the call appearance is idle or busy, DSS keys
act like Speed Dial keys, to call a station. When ringing, DSS keys act
like CA/DN keys, to answer a call. The LED indicator on the key shows
the status of the station’s call appearance (idle, ringing, hold, busy).
Shared call appearances for stations you wish to monitor must be
configured on your ISDN line. You must program the DSS number to
dial the monitored station on your phone (even if Parameter Download
is provided).
The Call Appearance number, key mode (CA or DSS), and
Directory Number will be shown in the upper line of the
display. If the key is not currently set up as a DSS key, the
DSS softkey option will appear.
Select DSS to enable the DSS option on this CA/DN key. The
number shown on the upper line is the Call Appearance /
Directory Number, not the DSS dialing string. You can change
the key back to standard CA/DN operation (no DSS) by
selecting CA/DN.
Select DSS#.
Using the dial pad, enter the number you would dial to call the
monitored station.
“Smart” pauses are entered with the PAUSE softkey, and are
shown in the display as a P character. The first pause in a dial
string will delay dialing until the call is answered; additional
pauses delay dialing for one second. Enter multiple pauses to
increase the delay time.