Teo 8810 ISDN Phone - Manual (Page 45)

Tone Commander 8810 User Guide 41
DIRECTORY PAGE 1
VIEW EDIT SORT SWAP
F575551234
<BKSP CLEAR PAUSE NAME
9995551000
<BKSP CLEAR PAUSE NAME
string will delay dialing until the call is answered; additional
pauses delay dialing for one second. Enter multiple pauses to
increase the delay time.
After entering the first digit, pause, or feature activator, the FA
softkey will be replaced by CLEAR.
If you need to make corrections while entering numbers,
select
◄BKSP (backspace) to delete the previous digit.
CLEAR removes all digits, allowing you to start over.
Dialing strings can include network feature activator codes, to
simplify the use of features such as Directed Call Pickup and
Call Forwarding.
Feature Activator (FA) numbers are entered with the FA
softkey, and are shown in the display as an F character. F
must be the first character in the dialing string; the two
numeric digits immediately following the F indicate the
network feature activator code. The FA softkey is only
available when no digits have been entered.
After entering F, the FA softkey will be replaced by CLEAR.
In the example below, the Speed Dial key sends feature code
‘57’ (Call Forward) followed by the directory number
‘555-1234’.
To return to the name entry screen after entering the number,
or select NAME.
When finished editing this entry, press the OK key to return to
the main Call Directory menu.