Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 130)

Configuring the T1 Network
5-6 Access Manager 2000 User Manual
• If a connection can’t be made, you’ll get an error message.
Check for the fault.
• If a successful connection is made from Access Manager 2000
to the node controller, the Element Configuration Menu appears.
3.
Menu used: Main / Configuration / Element / Edit
If connected to a standalone CSU, configure the options for that
CSU. If connected to a multiline controller, sequentially select and
configure each CSU you’ll use in that multiline shelf.
If you are using an Access System CSU with a DIU, configure your
near end DIU parameters now.
4.
Menu used: Main / Configuration / Node / Add
Generally, each near-end CSU is paired, over the network, with a
far-end CSU. Before you can configure a far-end CSU, you must
define its node. Access Manager 2000 will communicate with the
far-end node and CSU over the Facility Data Link.
Configure the near-end CSU parameters.
Near-end node Access Manager 2000
Node controller
C
S
U
DIUs
Configure the far-end node parameters.