Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 283)

Displaying individual circuit element status
Access Manager 2000 User Manual 8-13
■
[Shelf1, Slot 6] has a missing DIU 2132. The element’s
configuration is stored in the database, but the module itself is
missing, has failed, or has blown a 5V fuse.
If you press while viewing a Node Configuration screen,
the current configuration of the node and accessed circuit element is
retrieved and stored in the AM2000 database.
For the 551VST ML List 1 and 2, the following differences exist in the
NC/E Configuration and SIM Configuration Display
Menus:
■
The possible CSUs are numbered 1 to 28.
■
The Far-End CSU indicator is on the line below the near-end.
■
The right side of the screen has a Power Supply A and B (for
551VST List 1/A or List 1/B), or A, B, C and D (for 551VST List 2)
status indication.
Displaying individual circuit element status
Element status gives you the current configuration, status, and revision
level of the first CSU in the selected range.
The 551VST List 1/A does not have an Element Status option.
For all other ESF CSUs except the 4016 List 1, the Element Status screen
is nearly identical to that for the NC/E and SIM equipped with a 4016-R.
Only 551VST List 1/B and List 2 CSUs have the Enable Alarm
Latch option.
To determine the current status for a 551VST type circuit element:
1. In the On-line Access sub-menu, move the cursor to Element
Status , and press .
F8
Non-AS2000 node
Enter