Verilink PRISM 3301 (34-00239.5) Product Manual - Manual (Page 26)

18 C HAPTER 4: T ERMINAL I NTERFACE
SET SUPERVISORY DIAL-STRING
This command establishes the AT command dial string.
SET SUPERVISORY HANGUP-STRING
This command establishes the AT command hang-up string.
SET SUPERVISORY INIT-STRING
This command establishes the AT command initialization string.
SET SLIP
This command configures the network management (rear) port.
SET SLIP MODE
This command configures the network management port to either Direct or Modem.
SET SLIP BAUD
This command configures the network management port baud rate to 1.2, 2.4, 4.8,
9.6, or 19.2 kbps.
SET SLIP DIAL-STRING
This command establishes the AT command dial string.
SET SLIP HANGUP-STRING
This command establishes the AT command hang-up string.
SET SLIP INIT-STRING
This command establishes the AT command initialization string.
SET SLIP FILTER
Index option of 1-4. After selecting the option, enter the IP address.
SET SLIP UNIT-ADDRESS
This command establishes the unit IP address.
SET SLIP SUBNET-MASK
This command establishes the unit subnet mask IP address.
SET SLIP ROUTER-ADDRESS
This command establishes the unit router IP address.
SET SNMP READ-COMMUNITY
This command establishes the SNMP read-community with a string of up to 58
characters.
SET SNMP WRITE-COMMUNITY
This command establishes the SNMP write-community with a string of up to 58
characters.