Set datalink terminal dte, Set datalink terminal carrier, Get commands – Verilink PRISM 3301 (34-00239.5) Product Manual User Manual
Page 29: Get net, Get dte, Get supervisory, Get slip, Get snmp, Get map, Get status
Configuration Commands
21
SET DATALINK TERMINAL DTE
This command initializes the terminal type for the near-end unit as DTE.
SET DATALINK TERMINAL CARRIER
This command initializes the terminal type for the near-end unit as Carrier.
Get Commands
The PRISM 3301 detects and responds to alarm conditions per AT&T TR 54014
requirements and provides audible and visual indication of alarm conditions. The
GET commands display the current configuration settings. Each command is
followed by one or more keywords with each keyword being separated by a space.
GET NET
This command displays the network configuration settings.
GET DTE
This command displays the DTE configuration settings.
GET SUPERVISORY
This command displays the Supervisory configuration settings.
GET SLIP
This command displays the SLIP configuration settings.
GET SNMP
This command displays the SNMP configuration settings.
GET MAP
This command displays the map configuration settings.
GET STATUS
This command displays the status.
GET SCRAMBLER
This command displays the scrambler configuration settings.
GET PROGRAM
This command displays the program configuration settings.
GET ADMINISTRATION
This command displays the administration configuration settings.
GET AUDIBLE
This command displays the audible configuration settings.
GET DATALINK
This command displays the near-end data elements transmitted over the FDL.
Equipment ID Code.
Transmitted in all three FDL messages.