Returning products, Safety precautions – Verilink PRISM 3301 (34-00239.5) Product Manual User Manual
Page 4
iv
•
Technical Training on network concepts and Verilink products at (800) 837-4546,
ext. 346 and [email protected]
•
Web site at www.verilink.com
•
FAX-On-Demand at (800) 957-5465
Returning Products
A product must be assigned a Return Materials Authorization (RMA) number
before it is sent to Verilink for repair. An RMA number is issued by Verilink
Customer Service at (800) 926-0085, ext. 2282.
Safety Precautions
When handling this equipment, follow these basic safety precautions to reduce the
risk of electric shock and injury:
•
Follow all warnings and instructions marked on the product and in the manual.
•
Unplug the hardware from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a slightly damp cloth for cleaning.
•
Do not place this product on an unstable cart, stand, or table. It may fall, causing
serious damage to the product.
•
Slots in the unit are provided for ventilation to protect it from overheating. These
openings must not be blocked or covered. Never place this product near a radiator
or heat register.
•
This product should be operated only from the type of power source indicated on
the marking label and manual. If you are unsure of the type of power supply you
are using, consult your dealer or local power company.
•
Do not allow anything to rest on the power cord. Do not locate this product where
the cord interferes with the free movement of people.
•
Do not overload wall outlets and extension cords, as this can result in fire or
electric shock.
•
Never push objects of any kind into the unit. They may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill
liquid of any kind on this equipment.
•
Unplug the equipment from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
•
When the power supply cord or plug is damaged or frayed.
•
If liquid has been spilled into the product.
•
If the product has been exposed to rain or water.
•
If the product has been dropped or if the housing has been damaged.