Verilink PRISM 3301 (34-00239.5) Product Manual - Manual (Page 30)

22 C HAPTER 4: T ERMINAL I NTERFACE
Location ID Code. Transmitted in all three FDL messages.
Frame ID Code. Transmitted in all three FDL messages.
Unit. Transmitted in all three FDL messages.
Path ID Message. Only transmitted as part of the Path Identification Message.
Idle Signal ID Message. Only transmitted as part of the Idle Signal Identification
Message.
Test Signal ID Message. Only transmitted as part of the Test Signal Identification
Message.
Terminal Type. Transmitted in all three FDL messages.
GET FAR DATALINK
This command displays the far-end data elements that have been received over the
FDL.
Equipment ID Code. Received in all three supported FDL messages. The last value
received is displayed regardless of FDL message association.
Location ID Code. Received in all three supported FDL messages. The last value
received is displayed regardless of FDL message association.
Frame ID Code. Received in all three supported FDL messages. The last value
received is displayed regardless of FDL message association.
Unit. Received in all three supported FDL messages. The last value received is
displayed regardless of FDL message association.
Path ID Message. Only received as part of the Path Identification Message.
Idle Signal ID Message. Only received as part of the Idle Signal Identification
Message.
Test Signal ID Message. Only received as part of the Test Signal Identification
Message.
Terminal Type. Received in all three supported FDL messages. The last value
received is displayed regardless of FDL message association.
Query Commands The QUERY commands are associated with the performance monitoring (per TR
54014) of the PRISM 3301. Performance data for these parameters are calculated
and stored in the PRISM 3301 for accumulation periods of 15 minutes. At the end
of this period, the value for each parameter is written to its history register and
becomes available for review. A 24-hour history is maintained for each
performance parameter. The QUERY commands retrieve information maintained in
the system database. Each command is followed by one or more keywords with
each keyword separated by a space.