Verilink PRISM 3301 (34-00239.5) Product Manual - Manual (Page 31)

Configuration Commands

23
QUERY ALARMS
This command retrieves an entire alarm/event queue of related information. The
list displays one screen at a time. The following lists all the alarm and event
messages generated by the PRISM 3301 and can be accessed through the QUERY
ALARMS command.
DTE Clock Loss
DTE Clock Loss Clear
Network Loss of Signal
Network Loss of Signal Clear
Network Out of Frame
Network Out of Frame Clear
Network Receiving AIS
Network Receiving AIS Clear
Network Receiving Yellow Alarm
Network Receiving Yellow Alarm Clear
Network BPV > 1E
-6
Network BPV > 1E
-6
Clear
Network Parity Error > 1E
-6
Network Parity Error > 1E
-6
Clear
Network Remote Parity Error
Network Remote Parity Error Clear
System Reset Cold
System Reset Warm
Network Transmitting AIS
Network Transmitting AIS Clear
Network Transmitting Yellow Alarm
Network Transmitting Yellow Alarm Clear
Local DTE Loopback Set from User
Local DTE Loopback Clear from User
Local DTE Loopback Set from HSSI
Local DTE Loopback Clear from HSSI
Local Line Loopback Set from User
Local Line Loopback Clear from User
Local Line Loopback Set from HSSI
Local Line Loopback Clear from HSSI
User Tx Remote Line Loop-up Code to FE