Watson-Marlow 5O5XY Robot - Manual (Page 10)

S E T U P P R O G R A M M E
R S 2 3 2 R E M O T E N E X T
Press the RS232 button, the display will show:
1 2 0 0 B P S N E X T A C C E P T
Press the NEXT button until the desired baud rate is shown in the display.
Press the ACCEPT button to store the selected value. The previous setup
menu will be displayed.
Remote control operation
Press the REMOTE button, the display will show:
X Y K E Y P A D M O D E
N E X T A C C E P T
Press the NEXT to alternate between XY keypad and XY remote mode,
followed by the ACCEPT button to store the selected value and return to the
setup menu.
NOTE: After selecting XY remote mode, the keypad will become redundant,
all control will be via a remote keypad. For diagnostic help, refer to the
engineering mode flow chart on page 24.
Exit setup mode
To exit the setup mode press the ACCEPT button, the XY robot filler will
reset and display the following screen, prompting to press <START> to move
the dispensing head to the home position.
P R E S S < S T A R T >
T O H O M E M A C H I N E
When the dispensing head has been moved to the home position the main
menu will be called:
S O F T W A R E V E R X . X
M E M O R Y S E T U P G O
10