Watson-Marlow 5O5XY Robot - Manual (Page 8)

Part 2: Overview
Quick start for a pre-programmed robot
To initiate a fill sequence on a pre-programmed XY robot filler switch on
power to the unit and the following screen will be displayed:
S O F T W A R E V E R X . X
M E M O R Y S E T U P G O
Ensure that the vial tray is located correctly within the tray guides
and press the 'GO' button to begin a fill cycle.
The remainder of the manual explains how to program the system
for a variety of filling applications using different tray sizes and
equipment configurations.
Keypad layout
9
3
5
7
0
.
Enter
Start Stop
505XY Robot
2
4 6
8
1
Power
Beneath the display are three rectangular soft function keys. The function of
each key at any one time in a procedure is denoted by the text in the bottom
line of the LCD display.
The keypad serves two functions;
· To enable parameters to be entered into the operating programme of the
XY robot.
· To enable the operator to move the fill head
· The keys and functions are listed below::
Key Function
2 Move fill head to fill rear of XY robot filler
4 Move fill head left
6 Move fill head right
8 Move the fill head forwards (towards the front of the XY robot filler)
Conventions used in the manual
Throughout the manual conventions are used to describe the keyboard keys:
The soft keys are referred to as 'buttons', e.g. from the main menu press the
MEMORY button.
The keypad keys and the START/STOP keys are shown enclosed thus
<START>.
8