Welltech WS 6600 V.2.0 - Manual (Page 15)

Welltech Computer Co., Ltd.
WellBilling 6600 15
Figure 2.2-3
Step 4:
When screen shows “After configuration changed, please
re-login system with new IP address and execute
Soft-Reset!” click OK button as figure 2.2-4.
Figure 2.2-4
Step 5:
When screen shows “Setup network configuration
successfully!” click OK button as figure 2.2-5.
Figure 2.2-5
☺Note: Network control takes around 5-second to apply the
new network configuration. Please logon again with new
IP address after 5 seconds
.
System Time
Step 1:
When relogon to the new IP address; the next is to setup
the system time zone. Click Control > System Time to setup
the system. Enter current date and time. Apply the change by
clicking Apply button as figure 2.3-1.
Figure 2.3-1
Step 2:
If you would like to use SNTP to sync time with a SNTP V4
Server, click Time Sync button to setup it as figure 2.3-2.