Welltech WS 6600 V.2.0 - Manual (Page 19)

Welltech Computer Co., Ltd.
WellBilling 6600 19
run the following task in the beginning of month: free minutes
charge; monthly fee charge; deductible month charge; and reset
balance for expired user.
Monthly Job Running Period: The possible days in the
beginning of month to run the schedule job. This parameter will
consult with “Scheduled Job Running Time “to decide when to
run the schedule job. For example, the scheduled job running
time is 01-03 and monthly job running period is 1-4 days and this
month is February, the scheduled job will be ran on 01:00 to
03:00 each night of Feb. first to Feb. fourth.
Load Expired User: Whether to Load the expired user into
memory of Wellbilling 6600 or not.
Routing Rule: The RADIUS routing policy. It is required to use
WellSIP 6500 release 3.0 or later and the Welltech extended
attributes need to be turned on. If you need to specify the trunk
group, Wellgate 5260 release 6.2 is required or the gateway
need support RFC draft-ietf-iptel-trunk-group-10.
- Least Cost Route: Select the routing whose cost is least. It is
required to define the trunk group, gateway and carrier
together with carrier cost group.
- Carrier Priority Route: select the routing according to the
carrier’s priority.
- QoS routing based on ASR (answer rate): The best routing
based on the highest answer rate.
- QoS routing based on Mean Hold Time: The best routing
based on the longest average talk time.
- QoS routing based on Post Dial Delay: The best routing
based on the minimal dial delay (receive ring back signal).
QOS Route Start Threshold: When system startup, this is the
minimal calls required before starting the QOS routing. The
large count can make more accuracy routing but longer to start
the QOS route. It is recommended to use the number between 3
and 10.
Separate Administrator Login: Whether to separate the
administrator login, when enable this, the login page will don’t
include the Administrator user level. The administrator needs to
use \\xxx.xxx.xxx.xxx:10087\Admin to login.
Inter Proxy subscriber routing: To enable the subscriber lookup
and routing. It can be used to route the subscriber from multiple
SIP proxies. It requires WellSIP 6500 to make it work.
Display line per page: The max lines the every web page can