Welltech WS 6600 V.2.0 - Manual (Page 24)

Welltech Computer Co., Ltd.
WellBilling 6600 24
Client ID: The client ID
IP: The client IP address
Name: The client name
Type: The proxy server type
- WS6500 V2.0/V2.1/V2.1.2/V2.1.3/V2.1.4/V3.0: Selected when
a subscriber belonged to a WellSIP 6500 and need to be sync
automatically.
- Normal: Non WellSIP 6500 proxy server
- Sync:
Replicate account information to WellSIP 6500 or not
Service:
- ANI Validation: Use ANI to validate a user or not. If it is
enabled, 6600 will check calling party number first for
authentication, authorization and accounting. The calling
party’s corresponding account will be charged.
- User ANI as User ID/PWD: Automatically set RADIUS user ID
and password for RADIUS authenticator validation or not.
When you are using WG5250 with ANI validation, it is
recommended to enable it.
- Check ANI against User ID: When the calling no isn’t found in
ANI, should WellSIP 6500 search subscriber ID for the calling
no or not. If it is set and the user ID is found, the validation will
pass.
- Ignore Telephone Originate: Ignore those Accounting
messages whose h323-call-origin is “originate” and
h323-call-type is “Telephony”.
- Ignore VOIP Originate: Ignore those Accounting messages
which h323-call-origin is “originate” and h323-call-type is
“VOIP”.
Skip Authenticator: Replicate account information to WellSIP
6500 SIP proxy server or not
Secret Key: The shared secret key between WB 6600 and client
Radius recharge password: The Radius server recharge
password. When use RADIUS to do the recharge, this is the
RADIUS password used for authentication.
Provisional ID: The WS 6500 system user ID
Provisional Password: The WS 6500 password
Provisional Port: Provisional TCP port (default: 10091)
Proxy SIP UDP Service Port : It is mainly used for inter-proxy
subscriber routing. It is normally the port you defined in WellSIP
6500.