Welltech WS 6600 V.2.0 - Manual (Page 27)

Welltech Computer Co., Ltd.
WellBilling 6600 27
Start path: Configuration > Carrier
Figure 3.8-1
Click the Add button:
Figure 3.8-2
Parameter Description:
• Carrier ID: The carrier ID
• Carrier name: The carrier name
• State: Enable the carrier or not
• Least cost route: Whether to support the least cost route or not.
If it is enabled, this carrier will be one of the least cost route
candidates. Otherwise, it will not be in the candidate list of LCR
carrier.
• Carrier cost rate group: The carrier cost will be used for LCR
and profit calculation. You can click to select the rate group.
• Added prefix: The prefix will be added to the called number
sending to this carrier.
Click the List button and you can see the carrier information:
Figure 3.8-3
Gateway
Each gateway can have one or multiple trunk group. The gateway
can be a SIP gateway or proxy server.
Start Path: Configuration > Gateway
Figure 3.9-1