Westermo TDW-33 - Manual (Page 74)

6618-3202 74
Register Function Range Units Saved Default Note
S215 General
function
bitmap - - - 1 Bit 0: Connection establish
timeout (120 sec):
0 = Disable,
1 = Enable
(Default 1)
Bit 1: Ignore &F0 and &F1
command (flag not stored)
(Default 0)
Bit 2: Ignore PnP
(Default 0)
Bit 3: Ignore NULL char-
acter in command mode:
0=Disable, 1=Enable
(Default 0)
Bit 4: Exeute ATZ when
ATH command: 0=Disable,
1=Enable (Default 0)
Bit 5: Autodetect only
enabled once: 0=Disable,
1=Enable (Default 0)
Bit 6: Ignore ATZ: 0=Disable,
1=Enable (Default 0)
Bit 7: Reserved
S216 Send break
length time
in ms 0
S217 Send break
delay time 0
S218 DCD filter
time 0
S227 Line control
register con-
taining %S27
register:
0=Disable 0
S228 Line control
register con-
taining %S38
register:
0=Disable 0