ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 19)

www.acti.com
Installation Guide
19
Heavy Duty Wall Mount Installation
Procedures (Cable Goes Along the Wall)
Use this solution to install the camera on a straight wall using the Heavy Duty Wall Mount if the
cables cannot or should not pass through the wall, thus the cable will be routed along the wall.
Before starting the installation, make sure that the wall where the camera will be installed can
support the more than the total weight of the camera with the mounting accessories and other
cables.
Prepare the following materials needed for installation:

Heavy Duty Wall Mount package:
o Wall mount
o Wall mount plate
o Screws for camera
o Drill Template

Screwdriver

Screws (x4) to attach the Wall Mount to the wall (not supplied, purchase screws
applicable to the wall material where the Wall Mount will be installed)

Ethernet cable

Flexible conduit (as needed)