Step 11: close the dome cover – ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 User Manual

Page 48

Advertising

background image

Installation Guide

Step 11: Close the Dome Cover

1.

Align the position of the dome cover shroud to the direction of the lens.

2.

Tighten the three (3) screws to attach the dome cover to the camera body. An example of a

complete installation is shown below.

Advertising

This manual is related to the following products:

Outdoor Dome (B8xI8x) on Straight Wall with Wall Mount Outdoor Dome (E89) on Straight Wall with Wall Mount Outdoor Dome (B8xI8x) on Straight Wall with Accessory Sets of PMAX-0314 Outdoor Dome (E89) on Straight Wall with Accessory Sets of PMAX-0314 Outdoor Dome on Straight Wall with Wall Mount