ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 5)

www.acti.com
Installation Guide
5
Heavy Duty Wall Mount Installation
Procedures (Cable Passing Through the
Wall)
Perform the following procedures to install the camera on a straight wall using the Heavy Duty
Wall Mount if the cable will pass through a hole on the wall.
Before starting the installation, make sure that the wall where the camera will be installed can
support the more than the total weight of the camera with the mounting accessories and other
cables.
Prepare the following materials needed for installation:

Heavy Duty Wall Mount package:
o Wall mount
o Wall mount plate
o Screws for camera
o Drill Template

Screwdriver

Screws (x4) to attach the Wall Mount to the wall (not supplied, purchase screws
applicable to the wall material where the Wall Mount will be installed)

Ethernet cable

Flexible conduit (as needed)
NOTE: The camera images shown in the succeeding pages are provided for reference only,
actual camera may slightly differ.