ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 36)

www.acti.com
Installation Guide
36
Step 4: Prepare for Waterproof Installation
The Junction Box has three cable holes that can be used to route the cables. Remove the cap(s)
covering the cable holes as needed. Otherwise, leave the caps tightly screwed to the Junction
Box to avoid water leakage.
The Junction Box comes with two (2) Conduit Glands and one (1) Cable Gland used for
waterproof installations.

Cable Gland : For use with an Exterior-grade Ethernet cable. Exterior-grade Ethernet
cables are already waterproof. See Waterproof Solution with Naked Cable on page
37.

Conduit Gland : For use with a flexible conduit. This solution is recommended when an
exterior-grade Ethernet cable is not available or when other input/output devices or
external power adapter will be connected to the camera (select models only). See
Waterproof Solution with Conduit on page 39.
Determine the type of waterproof solution that is applicable to your installation requirements and
prepare the necessary accessories or purchase extra materials.
Cable Gland x 1 Conduit Gland x 2
For use with an Exterior-grade Ethernet
cable (not included in the package).
For use with 1/2” flexible conduit (not
in the package)