ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 26)

www.acti.com
Installation Guide
26
Step 3: Route the Cable Through the Wall Mount
1. Without connecting the cable/conduit gland parts, insert the cable into the bottom cable hole
and out through the hole marked below.
2. Pull enough length of the network cable (and other cables, such as power or input/output
device, if any) to connect to the camera later.
Cable Gland Solution Conduit Gland Solution
NOTE: When using the naked cable with the cable gland solution, be sure to pull enough
length of the cable to connect to the camera later. Once the clamping nut is tightened, the
cable cannot be pulled anymore.
or