ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 47)

www.acti.com
Installation Guide
47
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
In case of using a non-PoE switch, power up the camera using a power adapter (not
supplied). As needed, power up the other connected devices.
Step 9: Access the Camera Live View
See Accessing the Camera Live View on page 49 for more information.
Step 10: Adjust the Viewing Angle and Focus
Based on the Live View, adjust the viewing angle and orientation of the camera. Adjustments vary
per model, for detailed information, please refer to the following sections:

For D7x / D7xA / E7x / E7xA camera models, see D7x / D7xA / E7x / E7xA Series on
page 56.

For D8x / D8xA / E8x / E8xA / ACM-7411 camera models, see D8x / D8xA / E8x / E8xA
Series on page 58.

For KCM-7111 camera models, see KCM-7111 on page 59.

For KCM-7311 camera models, see KCM-7311 on page 60.