Emerson Process Management OXYMITTER 4000 IM-106-340 - Manual (Page 31)

Instruction Manual
IM-106-340, Rev. 4.0
May 2006
1-13
Oxymitter 4000
MODEL 751 REMOTE
POWERED LOOP LCD
DISPLAY The display (Figure 1-10) provides a simple, economical means to obtain
accurate, reliable, and remote indication of important process variables. This
display operates on the 4-20 mA line from the Oxymitter 4000. Refer to Model
751 remote powered loop LCD manual for calibration and wiring.
Figure 1-10. Model 751 Remote
Powered Loop LCD Display
PROBE OPTIONS
Diffusion Elements Ceramic Diffusion Assembly
The ceramic diffusion assembly, Figure 1-11, is the traditional design for the
probe. Used for over 25 years, the ceramic diffusion assembly provides a
greater filter surface area. This element is also available with a flame arrestor,
and with a dust seal for use with an abrasive shield.
Figure 1-11. Ceramic Diffusion
Assembly
22220059A
+ +
+ +
%
19280010