Configuring a zone member – H3C Technologies H3C SecPath F1000-E User Manual
Page 36
Advertising
![background image](/files/813030/content/doc036.png)
26
Figure 18 Zone list
2.
Click Add.
Figure 19 Creating a zone
3.
Configure the zone as described in
4.
Click Apply.
Table 7 Configuration items
Item Description
Zone ID
Set the zone ID.
Zone Name
Set the zone name.
Preference
Set the preference of a zone.
By default, packets from a high priority zone to a low priority zone are allowed to pass.
Share
Set whether the specified zone can be referenced by other virtual devices.
Configuring a zone member
1.
Select Device Management > Zone from the navigation tree.
2.
Click the
icon corresponding to the zone to be modified.
Advertising
This manual is related to the following products: