H3C Technologies H3C SecPath F1000-E - Manual (Page 55)

45
Configuring address resources
NOTE:
The address resource configuration is available only in the web interface.
Address resource overview
Address resources are classified into four categories: IP address resource, IP address group resource,
MAC address resource, and MAC address group resource. They can be referenced by interzone policies
to define packet match criteria.
• An IP address resource is a collection of domain names or IP address resources and falls into three
types:
{
Host address resource—A domain name, or one or more individual IP addresses.
{
Address range resource—A range of IP addresses defined by a start IP address and an end IP
address. Some individual addresses, if necessary, can be excluded from the range.
{
Subnet address resource—A subnet IP address defined by an IP address and a wildcard. Some
individual addresses, if necessary, can be excluded from the range.
• An IP address group resource is a collection of host address resources, address range resources,
and subnet address resources.
• An MAC address resource is a collection of MAC addresses.
• An MAC address group sources is a collection of MAC address resources.
Configuring an address resource
Configuring a host address resource
Select Resource > Address > IP Address from the navigation tree to enter the host address resource list
page, as shown in Figure 41 . Then, click Add to enter the host address resource configuration page, as
shown in Figure 42 .
Figure 41 Host address resource list