H3C Technologies H3C SecPath F1000-E - Manual (Page 99)

89
Table 33 Configuration items
Item Description
Enable unidirectional traffic detection
Enable or disable unidirectional traffic detection.
• With unidirectional traffic detection enabled, session management
processes both the unidirectional and bidirectional traffic.
• With unidirectional traffic detection disabled, session management
processes only the bidirectional traffic.
ACL
Specify the ID of an ACL.
Only one ACL can be referenced as the persistent session rule, and the
last referenced ACL takes effect. If no ACL is specified, persistent
sessions are not allowed.
To configure an ACL, select Firewall > ACL from the navigation tree.
For more information, see ACL configuration.
Session Aging Time
Set the aging time of persistent sessions.
The value of 0 means that the persistent sessions will not be aged.
TCP Protocol
SYN_SENT State
and SYN_RCV State
Aging Time
Specify the SYN_SENT state and SYN_RCV state aging time for TCP.
FIN_WAIT State
Aging Time
Specify the FIN_WAIT state aging time for TCP.
ESTABLISHED State
Aging Time
Specify the ESTABLISHED state aging time for TCP.
UDP Protocol
OPEN State Aging
Time
Specify the OPEN state aging time for UDP.
READY State Aging
Time
Specify the READY state aging time for UDP.
ICMP Protocol
OPEN State Aging
Time
Specify the OPEN state aging time for ICMP.
CLOSED State
Aging Time
Specify the CLOSED state aging time for ICMP.
Aging
Accelerate
Queue
Accelerate Queue
Aging Time
Specify the accelerate queue aging time.
RAWIP
Protocol
OPEN State Aging
Time
Specify the OPEN state aging time for RAW IP.
READY State Aging
Time
Specify the READY state aging time for RAW IP.
DNS Session Aging Time Specify the DNS session aging time.
FTP Session Aging Time Specify the FTP session aging time.
MSN Session Aging Time Specify the MSN session aging time.
QQ Session Aging Time Specify the QQ session aging time.
SIP Session Aging Time Specify the SIP session aging time.