H3C Technologies H3C Intelligent Management Center - Manual (Page 62)

54
2. Select the record that you want to delete, and then click Delete.
3. Click Yes to confirm the deletion.
Type management
The type management options are located in the Management folder on the CMDB Management node
in Service Desk. The following sections describe the four categories of type management: CI type, CI
relation type, knowledge/question type and matching rules.
CI type management
A CI type is used to define the CI’s attributes. CIs can be added to types defined by IMC or the user can
create their own types.
Adding a CI type
A CI is any software or hardware component of an IT infrastructure. CIs are classified into CI types, which
can be defined by the IMC system (such as device asset and sub-asset, model, device series, and device
category) or defined by the user (such as meeting room).
To add a CI type:
1. In Service Desk, click the CMDB Management node in the navigation pane to expand it, expand
the Management folder if it is not already expanded, and then double-click CI Type Management.
The CI Type Management tab opens in the task pane.
2. Click Add. The Add CI Type dialog box appears, as shown in Figure 33 .